맨 위
STS1000 Series Static Transfer Switch(110Vac/220Vac) Öth
1. Specification
1.Switch over between two power suppliers
2.Automatic Selection of batter supply
3.Switch over time less than 4s
4.Any two AC power supplies with sinusoidal output, high adaptability
5.Provide RS485 communication and Dry contact, support SNMP remote
모델
Single cut type UP-STS16S UP-STS25S UP-STS32S UP-STS40S UP-STS45S
Double cut type UP-STS16D UP-STS25D UP-STS32D UP-STS40D UP-STS45D
Phase Single Phase
output current 16에이 25에이 32에이 40에이 45에이
Max allow current 18에이 28에이 35에이 45에이 50에이
AC Input
AC Input voltage 110Vac/220Vac
Input voltage range 90~130Vac@110Vac; 190~260Vac@220Vac
Valid working Voltage ±12%, backlash±5V
Frequency 50Hz/60Hz(set in factory)
Power off voltage 110다섯: ≤55Vac Or ≥135Vac,backlash±5V≤55Vac Or ≥135Vac,backlash±5V 220V: ≤190Vac Or ≥260Vac,backlash±5V≤190Vac Or ≥260Vac,backlash±5V
Power off frequency ≤45Hz or ≥65Hz,Power off Voltage=±0.2Hz
Switch Time <4MS
Overload capacity Load current is 110%, operating continuously
Load current> 110%, immediately shut-off;
Working Environment
Dielectric strength 2000Vac/10mA/60s
Humiditty 0%~90%, no moisture condensation
Work temperature -25℃~50℃
Storage temperature -40℃~70℃
Noise(1m) <55dB
Size(mm) 482*44.5*343(1U)
Communitcation RS485/SNMP

답글 남기기

이메일 주소를 발행하지 않을 것입니다. 필수 항목은 *(으)로 표시합니다

Kristin과 채팅하십시오
이미 1902 메시지

  • 크리스틴 10:12 오전, 오늘
    메시지를 받게되어 기쁩니다, 그리고 이것은 당신에게 크리스틴 반응입니다